Custom Load Development

What to Expect

You invested in your custom rifle, now it's time to invest in the ammunition to give your rifle its full potential!

All load development will be done with the very best, most modern reloading components available. Each piece of brass will be gone over as if I were preparing for KO2M. This includes primer pocket uniforming, trimming necks, mandreling, and powder loaded to the kernel just to name a few...
You will get a Precision Confirmation Card with every Custom Load Development pictured above for bragging rights.
Every client will also get a Custom Ammunition Sticker with all the details of their Load Development.
CLIENTS WILL PROVIDE ALL OF THEIR OWN COMPONENTS - We can help you allocate them, for a surcharge of 10%.
** We are now charging an additional $125.00 for any rifle with a carbon fiber barrel under 12 lbs.

Package 1

Package 1

Package 1

Ladder testing to ensure single digit SD's
Seeding depth test to ensure precision
A paper target with a group at 100 yards will be provided
I'll shoot the rifle/ammo combo at 500 yards to ensure precision at distance
You will get the recipe for the load & muzzle velocity

Per Rifle Fees:

.470 Bolt Face - $600

.540 Bolt Face - $650

.585 Bolt Face - $700

.640 Bolt Face - $750

*Client Provides ALL Components*

Package 2

Package 1

Package 1

Ladder testing to ensure single digit SD's
Seeding depth test to ensure precision
A paper target with a group at 100 yards will be provided
I'll shoot the rifle/ammo combo at 1000 yards to ensure precision at distance and a picture of the group will be included
You will get the recipe for the load & muzzle velocity

Per Rifle Fees:

.470 Bolt Face - $700

.540 Bolt Face - $750

.585 Bolt Face - $800

.640 Bolt Face - $850

*Client Provides ALL Components*

Package 3

Package 1

Package 3

Ladder testing to ensure single digit SD's
Seeding depth test to ensure precision
A paper target with a group at 100 yards will be provided
I'll shoot the rifle/ammo combo at 1000 yards to ensure precision at distance
You will get the recipe for the load & muzzle velocity
Includes truing the Kestrel at Mach 1.2

Per Rifle Fees:

.470 Bolt Face - $750

.540 Bolt Face - $800

.585 Bolt Face - $850

.640 Bolt Face - $900

*Client Provides ALL Components*

Package 4

Rifle Cleaning Package

Package 3

Ladder testing to ensure single digit SD's
Seeding depth test to ensure precision
A paper target with a group at 100 yards will be provided
I'll shoot the rifle/ammo combo at 1000 yards to ensure precision at distance
You will get the recipe for the load & muzzle velocity
Confirm your rifles ballistic coefficient over an Oehler 89 at Mach 1.2 & if requested out to Mach .9 for subsonic BC
Includes truing the Kestrel at Mach 1.2 & doing a DSF at subsonic ranges

Flat Rate Fee - $1,500 Per Rifle

*Client Provides ALL Components*

Rifle Cleaning Package

Rifle Cleaning Package

Rifle Cleaning Package

Barrel Only - $75
Full Rifle Cleaning - $150

* Gas Guns - Extra - $25

Our Little Reloading Lab! Scroll to See the Progress of our Hard Work!

Lowe's Pre-Cut Shed Installed - Lowe's Installed, then Chase & Lauren damn near finished the rest! Caulking, Outside Paint, Insulation, OSB, Inside Paint, & Floors
March & April 2023 - See the journey --->

Electrical Ran!

Outside Painted - Only Lacking Trim

Insulation & OSB Time!

Insulated the Roof

Covering the Insulation w/OSB

OSB - 1 Piece at a Time!

Lauren Cutting

Chase PewPew'ing the OSB

Starting on Inside Paint

We Have Electricity!

Split Unit Installed! - A/C Heat & Humidity Control

Outside Paint - Complete!

Cutting the Rubber Stall Mats

Floor Complete!

New Lockers for Organizing
Teagan's Inspecting!

Time to Lay Down Rock!

1/3 Rock Laid

Lauren Shoveling Rock - POOPED! Phew!

Rock Laid!

Taking the Labels Off - bleach water and razor blade

200-ish Done, 200-ish to Go....!

Closeup of Bottle Skirting

Recycled Bottles for the Skirting - so much more to do...!

Outside Complete!

Lockers to organize!

Inside Storage/Expandable Workbench

Custom Reloading Table
NoCo Welding & Fab - Jimmy GoatSales@gmail.com

Getting Organized & Finished!
Y'all hit us up for custom load development!